READ POST 1 & 2 FIRST-Rise of the Resistance Boarding Group Planning and Information-*No Spoilers*

[ten50]

This means I would have gotten one, correct?

 

[AliceNDinah]

Yep, except day of everyone in your group with a park pass reservation will be preselected.

Ok, so on that note: if you make it to that screen, is that considered a successful practice? I JUST tried and got the "Not so fast-no park reservations found" message....it's probably been covered and I apologize. Just want to get practice in before the 11th

 

[AliceNDinah]

View attachment 577391

This means I would have gotten one, correct?

HA. I just asked that too!!!!

 

[LSUGeaux]

Wow! I refreshed literally the second the clock switched to 7a and hit join on the next screen (where our names were already selected) immediately, and it was already full. Like, all before 7:00:03. I’m not sure I could have done anything more perfectly if it’s booked full in under 3 seconds. Fingers crossed for 1pm luck today!

 

[ENJDisneyFan]

View attachment 577391

This means I would have gotten one, correct?

Ok, so on that note: if you make it to that screen, is that considered a successful practice? I JUST tried and got the "Not so fast-no park reservations found" message....it's probably been covered and I apologize. Just want to get practice in before the 11th

Yes - that is a successful practice!

 

[ENJDisneyFan]

Wow! I refreshed literally the second the clock switched to 7a and hit join on the next screen (where our names were already selected) immediately, and it was already full. Like, all before 7:00:03. I’m not sure I could have done anything more perfectly if it’s booked full in under 3 seconds. Fingers crossed for 1pm luck today!

What screen did you "refresh" on? My advice is always to wait on the AT AT screen until the precise moment my phone clock changes to 7am, then Join x3 without stopping to click or read anything. No refreshing needed.

 

[mamaofsix]

I will work on it in a week or so. I’m on my way to my Dad’s memorial and plan to unplug from electronics once I arrive and spend time with family. So hang tight and I’ll work on something once I get back.

My condolences on the loss of your Dad. Thank you so much for all of your help with this thread.

 

[Suejacken]

I will work on it in a week or so. I’m on my way to my Dad’s memorial and plan to unplug from electronics once I arrive and spend time with family. So hang tight and I’ll work on something once I get back

So sorry for your loss

 

[preemiemama]

I will work on it in a week or so. I’m on my way to my Dad’s memorial and plan to unplug from electronics once I arrive and spend time with family. So hang tight and I’ll work on something once I get back.

So sorry for your loss. Thank you for all your help on this thread.

 

[Wood Nymph]

Wow! I refreshed literally the second the clock switched to 7a and hit join on the next screen (where our names were already selected) immediately, and it was already full. Like, all before 7:00:03. I’m not sure I could have done anything more perfectly if it’s booked full in under 3 seconds. Fingers crossed for 1pm luck today!

It may have been the fact that you refreshed rather than just hit the join button at 7am. The groups fill surprisingly early, like within seconds, so don't refresh anytime within the last few seconds before 7am.

 

[lovethattink]

It may have been the fact that you refreshed rather than just hit the join button at 7am. The groups fill surprisingly early, like within seconds, so don't refresh anytime within the last few seconds before 7am.

Yes! This! Don’t refresh at 7, every second counts!!

 

[nduckles]

I’m confused.....what is AT-AT?

 

[lovethattink]

I’m confused.....what is AT-AT?

This

 

[LSUGeaux]

What screen did you "refresh" on? My advice is always to wait on the AT AT screen until the precise moment my phone clock changes to 7am, then Join x3 without stopping to click or read anything. No refreshing needed.

Thanks for the tip! Where is the AT AT screen? From the app, I have virtual queues, join virtual queue, then this screen.

Yes! This! Don’t refresh at 7, every second counts!!

Thanks for the tips, everyone! One question: when I said refresh, I was on the “join virtual queue” page with ROTR listed as the only attraction. Does the join button automatically pop up at 7 if you don’t pull down the screen (or refresh, for lack of a better term)? There was no blue button at 6:59:59, and when I pulled down right at 7, join popped up. I quickly clicked & clicked the next join button on the screen with our names selected (didn’t hesitate), but it was full by then.

I don’t see any AT AT screen from my app. I have Virtual Queues - My Queues (where you click Join Virtual Queue) - then the ROTR screen which has a small circular pic of a storm trooper and all the ride info (the screen where the join button was at 7a).

I appreciate your advice! I’ll try again at 1pm and hope for the best we are having a wonderful trip either way!

 

[nduckles]

Thanks for the tip! Where is the AT AT screen? From the app, I have virtual queues, join virtual queue, then this screen.

Thanks for the tips, everyone! One question: when I said refresh, I was on the “join virtual queue” page with ROTR listed as the only attraction. Does the join button automatically pop up at 7 if you don’t pull down the screen (or refresh, for lack of a better term)? There was no blue button at 6:59:59, and when I pulled down right at 7, join popped up. I quickly clicked & clicked the next join button on the screen with our names selected (didn’t hesitate), but it was full by then.

I don’t see any AT AT screen from my app. I have Virtual Queues - My Queues (where you click Join Virtual Queue) - then the ROTR screen which has a small circular pic of a storm trooper and all the ride info (the screen where the join button was at 7a).

I appreciate your advice! I’ll try again at 1pm and hope for the best we are having a wonderful trip either way!

When I open the app, I can find the AT AT screen if I scroll down on the home page.

 

[ENJDisneyFan]

Thanks for the tip! Where is the AT AT screen? From the app, I have virtual queues, join virtual queue, then this screen.

Thanks for the tips, everyone! One question: when I said refresh, I was on the “join virtual queue” page with ROTR listed as the only attraction. Does the join button automatically pop up at 7 if you don’t pull down the screen (or refresh, for lack of a better term)? There was no blue button at 6:59:59, and when I pulled down right at 7, join popped up. I quickly clicked & clicked the next join button on the screen with our names selected (didn’t hesitate), but it was full by then.

I don’t see any AT AT screen from my app. I have Virtual Queues - My Queues (where you click Join Virtual Queue) - then the ROTR screen which has a small circular pic of a storm trooper and all the ride info (the screen where the join button was at 7a).

I appreciate your advice! I’ll try again at 1pm and hope for the best we are having a wonderful trip either way!

On the home page of MDE scroll down until you see the picture of the AT AT vehicles (see screen shot posted above). Wait there until your phone clock turns to 7am and then immediately click that join button (followed by join on the next 2 screens). Do not try to refresh anything.

 

[nduckles]

On the home page of MDE scroll down until you see the picture of the AT AT vehicles (see screen shot posted above). Wait there until your phone clock turns to 7am and then immediately click that join button (followed by join on the next 2 screens). Do not try to refresh anything.

Thank you so much. I know you must all be tired of answering the same questions but my goodness there are a lot of posts to wade through!
Will do a test run today!

 

[LSUGeaux]

You’re the best! Disney is overwhelming as someone who hasn’t been as an adult. I genuinely appreciate your help!!

 

[Acousticpharm]

One thing is confusing to me. Do you have to click join three times or two once 7am hits? Some people are saying wait at the AT AT screen till 7 then hit join (3 times). However, you can hit the first join (the AT AT screen) early at say 655. Then from the screen it brought you to at 7 a join button pops up. You hit that and then join again (the select part screen) and then done. There is no reason to wait till 7 to press the first ( ATAT) join right just do it before so that at 7 you only have to press join twice?

 

[LSUGeaux]

One thing is confusing to me. Do you have to click join three times or two once 7am hits? Some people are saying wait at the AT AT screen till 7 then hit join (3 times). However, you can hit the first join (the AT AT screen) early at say 655. Then from the screen it brought you to at 7 a join button pops up. You hit that and then join again (the select part screen) and then done. There is no reason to wait till 7 to press the first ( ATAT) join right just do it before so that at 7 you only have to press join twice?

I got in at 1pm (yay!) with this method. From the AT AT, you press join, then join again, then confirm or whatever on the screen with the names. It was 3 or 4 clicks. Just keep clicking til you’re out of clicks. I didn’t even read anything. I had to go back after to see what group we were in.

I waited right until 1. The join button won’t be on the 2nd screen until that time. So you either need to refresh from the 2nd screen (what I did unsuccessfully this morning) or wait at the AT AT screen until exactly the right time (what did work this afternoon).